DESCRIPTION
High power and versatility class D power amplifier based on Powersoft LITEMOD 4HV equipped with PFC (Power Factor Correction) and 4 output channels to provide a maximum of 4000W. Smart Rail Management (SRM) technology maximizes system efficiency by minimizing heat dissipation. This allows you to have a very powerful yet lightweight amplifier without noisy cooling fans.
Particularly suitable for driving sub-woofers or for driving low channels in hi-end multi-amplification systems.
The amplifier is provided with a series of protections in case of overheating, short circuit, overload, DC offset and / or high frequency stationary component detected on the outputs (to protect the speakers in case of failure)
DSP
This amplifier is equipped with a DSP processor based on Analog Devices Sigma DSP 50 MIPS platform, with 2 input and 2 output channels . Thanks to the 24bit @ 48kHz AD / DA conversion, 118/114 dB of dynamic range, the internal 56-bit processing and a complete library of crossover filters, equalizers and limiters, the designer of active systems has all the tools to adapt the amplifier to speakers and achieve the desired behavior . The DSP system is fully supported by the control software ArmoníaPlus by Powersoft, which offers quick and easy access to DSP functionality via a simple Ethernet cable, including some proprietary algorithms such as the Frequency Dependent RMS Limiter.
DRIVE YOUR SUBWOOFER WITH THE INCREDIBLE POWER OF THE STUDIO N12
3000
WATTS@2OHM
4000
WATTS@4OHM
3000
WATTS@8OHM
DSP specs
-
Number of channels: 1 in / 2 out (configurable as 2 in / 2 out)
-
Architecture: Analog Devices SigmaDSP® 50 MIPS
-
AD/DA converters: AKM 24 bit @ 48 kHz
-
Internal processing: 28-bit data path with 56-bit internal processing
-
Latency: 1.02 ms fixed latency architecture
-
User data storage: Up to 4 local presets, unlimited via ArmoníaPlus
-
Firmware update : via Ethernet
-
Remote control: ArmoníaPlus
DSP features
-
Delay: 340 ms input delay 10 ms per channel output delay
-
Input equalizer: 5 parametric equalizers: hi/lo-shelving, all-pass, band-pass, band-stop, hi/lo-pass
-
Output equalizer: Parametric IIR filters: peaking, hi/lo-shelving, all-pass, band-pass, band-stop, hi/lo-pass
-
Crossover: Butterworth, Linkwitz-Riley, Bessel: 6 dB/oct to 48 dB/oct (IIR)
-
Limiters: Peak limiter, RMS limiter, frequency dependent RMS limiter, Clip limiter, Temperature limiter
NOT ONLY
SUBWOOFER
PTL MODE 2IN/2OUT
OPTIONAL SILENT FAN
Technology
Powersoft Litemod 4HV
Technical specifications
Output power PTL = 2 x 2000W (2Ω), 2 x 1500W (4Ω) , 2 x 800W (8Ω)
Output power PBTL = 3000W (2Ω), 4000W (4Ω) , 3000W (8Ω)
Max output voltage / current PTL = 135 Vpeak / 100 Apeak
Max output voltage / current PBTL = 270 Vpeak / 100 Apeak
Built in DSP 50 MIPS 2in/2out (AD/DA 24bit @48kHz)
Gain 26dB adjustable -∞/+6dB
Frequency response 10 Hz - 30 kHz ( ±1 dB , 1 W @ 8 Ω)
SNR> 117 dB (20 Hz - 20 kHz, A weighted)
THD+N< 0.08% from 1 W to half power (typically <0.05%)
Damping factor >500 @ 1kHz
Analog inputs: 2 combo Jack-XLR (or 1 combo Jack-XLR + 1 XLR link out)
Digital inputs: RJ45 (or USB)
Fan (optional)
Trigger (option)
Mains: Universal mains, auto select (100-240 V, 50-60 Hz)
Casing: black metal with aluminium front and rear panel (3U)
Measurements: 435x300x120mm
Weight: 8kg